Home>> Kaboom>> Grind Your Motor!>>
InsaneHydraulics - Sergiy Sydorenko 2009-2010 All Ridghts Reserved
Home
Introduction
The Simple Test
Back-Engineering?
The Most Basic Basics
Let's Talk Hydraulics
Back-Engineer This!
Battlefield
Kaboom
Library
News Archive
Bla-Blaimer
Contacts
Guestbook
HomeIntroductionThe Simple TestBack-Engineering?The Most Basic BasicsLet's Talk HydraulicsBack-Engineer This!BattlefieldKaboomLibraryNews ArchiveBla-BlaimerContactsGuestbook |
    What do you do when you buy a geroller hydraulic motor, and it turns out to be just a tiny bit bigger than your machine's structure? This isn't that much of a brain teaser, is it? - You just take a power tool - an angle grinder - and grind off the tiny insignificant bit of the motor that stood in your way! The problem's solved - the motor finally fits!!!What? Those little screws were holding the motor together? It has oil under pressure inside and now the oil leaks all over the rig? You should've told it BEFORE we started grinding...
hydraulic motor
hydraulic motor
hydraulic motor
hydraulic motor