Home>> Let's Talk Hydraulics>> Aftermarket Spares>> Sauer Danfoss Series 90 Valve Plate>>
InsaneHydraulics - Sergiy Sydorenko 2009-2011 All Ridghts Reserved
Home
Introduction
The Simple Test
The Most Basic Basics
Let's Talk Hydraulics
Back-Engineer This!
Battlefield
Kaboom
Library
News Archive
Bla-Blaimer
Contacts
Guestbook
HomeIntroductionThe Simple TestThe Most Basic BasicsLet's Talk HydraulicsBack-Engineer This!BattlefieldKaboomLibraryNews ArchiveBla-BlaimerContactsGuestbook |
    This aftermarket valve plate for Sauer Danfoss series 90 closed loop pump is almost perfect! There's only one thing that's not quite right - the round notches, that are supposed to be a relatively tight fit with the pump end plate guiding pins - on the aftermarket plate they are cut too deep, so it can actually move quite a lot. It's normal for the valve plates of these series to exhibit some play when in place, just not that much!
Sauer Danfoss series 90 valve plate
Sauer Danfoss series 90 valve plate